Looking for a high-quality dash cam that is perfect for your Mercedes Benz E450? Look no further than the BlackVue DR750X-3CH Plus Dash Cam! In this blog post, we will be diving into the steps necessary to perform a hardwire installation of your new dash cam. With our easy-to-follow guide, you can have your BlackVue DR750X-3CH Plus up and running in no time. So, let’s get started!

BlackVue DR750X-3CH Plus Dash Cam x Mercedes Benz E450: How to Hardwire Install

Introduction

Keeping your vehicle safe and secure has never been easier thanks to the BlackVue DR750X-3CH Plus dash cam. This high-end camera is designed with three separate lenses to give you a wide-angle view of your surroundings. But how do you install it in your Mercedes Benz E450, and is hardwiring necessary? In this guide, we’ll show you how to hardwire the BlackVue DR750X-3CH Plus dash cam into your vehicle for maximum functionality, including what tools you’ll need, and how to properly clean and mount the cameras.

Tools Required

• Hardwiring kit
• Circuit tester
• Trim removal tool
• Zip ties
• Add fuses

Step-by-Step: How to Hardwire Install the BlackVue DR750X-3CH Plus Dash Cam Into Your Mercedes Benz E450

1. Locate the fuse box/power source: The first step is to locate your vehicle’s fuse box/power source. Consult your owner’s manual for the exact location, but it’s usually located near the driver’s side footwell or on the side of the dashboard.

2. Splice the wires: Once you’ve located the fuse box/power source, you’ll need to splice the wires of the hardwiring kit into the appropriate wires. Consult the kit’s instructions for the correct wire connections.

3. Root the cables from the rear trunk to the front camera: After splicing the wires, you’ll need to root the cables from the rear trunk to the front camera. To do this, use zip ties to secure the cables to the existing wires in the vehicle and route them along the headliner to the front camera location.

4. Mount the cameras: The BlackVue DR750X-3CH Plus dash cam includes three cameras that need to be mounted in specific locations for optimal coverage. Mount the front camera on the windshield using the adhesive mount. For the interior and rear cameras, mount them on the left side of the rearview mirror and the uppermost center of the rear windshield, respectively.

5. Tuck wires neatly into the roof panel: Before finishing the installation, be sure to tuck all wires neatly into the roof panel for a clean and unobtrusive look.

6. Test the functionality: After starting the car, test the functionality of the three-channel system to ensure that the BlackVue DR750X-3CH Plus dash cam is working properly and recording.

Conclusion

With the BlackVue DR750X-3CH Plus dash cam and our step-by-step guide, you can now easily hardwire the dash cam into your Mercedes Benz E450 for maximum functionality and protection. Remember to follow the instructions carefully and to test the system after installation to ensure optimal performance.

FAQS ##

1. Is hardwiring necessary for the BlackVue DR750X-3CH Plus dash cam to work?

• No, hardwiring is optional, but it is recommended for maximum use of the camera’s features.

2. What is included in the hardwiring kit for the BlackVue DR750X-3CH Plus dash cam?

• The hardwiring kit includes tools such as a circuit tester, trim removal tool, zip ties, and add fuses.

3. How many cameras are included in the BlackVue DR750X-3CH Plus dash cam?

• The dash cam includes three separate cameras for a wide-angle view of your surroundings.

4. Why is it important to clean the windshield before mounting the cameras?

• A clean windshield will ensure that the cameras’ adhesive mounts stick properly and do not fall off while driving.

5. Where should I mount the interior and rear cameras in my Mercedes Benz E450?

• The interior camera should be mounted on the left side of the rearview mirror, and the rear camera should be mounted in the uppermost center of the rear windshield for optimal coverage.