Curious what you should set your impact sensitivity to? #ytshorts

Curious about what impact sensitivity you should set? Join us as we delve into the world of impact sensitivity settings in our latest blog post. Discover the optimal adjustments for your preference and playstyle. Let’s embark on this journey together and unravel the mysteries of #ytshorts.

Curious what you should set your impact sensitivity to? #ytshorts


When it comes to setting up your dash cam, one important aspect to consider is the impact sensitivity. Getting this just right can make a significant difference in the effectiveness of your dash cam’s functionality. In this article, we will discuss the importance of impact sensitivity, why it is crucial for capturing incidents, and provide recommendations on how to achieve the optimal setting. So, let’s dive in!

Understanding Impact Sensitivity

  1. We recommend setting the impact sensitivity of your dash cam to high.
  2. Setting the sensitivity high ensures the detection of various situations, including car collisions and bike impacts.
  3. Sensitivity is crucial for capturing incidents not covered by the motion sensor.
  4. The impact sensitivity detects impacts from all angles, providing comprehensive coverage.
  5. It is important to be aware of potential damage to your vehicle, even from smaller impacts.
  6. Higher sensitivity allows for better surveillance and protection of your parked vehicle.
  7. The impact sensitivity helps in capturing incidents that may occur while you are away from your vehicle.
  8. Adjusting the impact sensitivity can enhance the effectiveness of your dash cam’s functionality.

Why High Sensitivity Matters

When it comes to capturing incidents on the road, your dash cam’s impact sensitivity plays a vital role. By setting it to a high level, you increase the chances of your dash cam capturing crucial video footage during an impact. Here’s why high sensitivity matters:

  1. Comprehensive Coverage: A dash cam with high impact sensitivity will detect and record impacts from all angles. This ensures that you have comprehensive coverage in case of any incidents, whether it’s a collision or a minor fender bender.

  2. Protection Against Undetected Situations: While motion sensors can detect movement, they might not pick up on smaller impacts that can still cause damage to your vehicle. By setting the impact sensitivity high, you can ensure that even these undetected situations get recorded.

  3. Enhanced Surveillance: High impact sensitivity allows your dash cam to act as a vigilant observer, providing better surveillance and protection for your parked vehicle. This is especially important if you frequently park in high-risk areas or need to leave your vehicle unattended for extended periods.

Achieving the Optimal Setting

Now that we understand the importance of high impact sensitivity, let’s look at how you can achieve the optimal setting for your dash cam:

  1. Experiment with Different Levels: Start by setting your dash cam’s impact sensitivity to the highest level and see how it performs. If you notice that it triggers too easily or records false positives, gradually decrease the sensitivity until you find the right balance.

  2. Consider Your Driving Conditions: Factors like road quality, speed bumps, and traffic congestion can influence the impact sensitivity you need. If you frequently drive on bumpy roads or encounter situations where impacts are more likely, it may be beneficial to keep the sensitivity higher.

  3. Consult the Manufacturer’s Guidelines: Check the user manual or the manufacturer’s website for specific recommendations on impact sensitivity settings. They may offer guidance based on the capabilities and sensitivity range of your dash cam model.


Setting the impact sensitivity of your dash cam is a crucial step in ensuring the optimal functionality of your device. By adjusting the sensitivity level, you can enhance its ability to capture important incidents and protect your vehicle. Remember to experiment with different settings and consider your driving conditions to find the right balance. So, make sure to set your impact sensitivity to high and enjoy the added peace of mind while on the road!


  1. What happens if I set my dash cam’s impact sensitivity too high?
    Setting the impact sensitivity too high may result in false positives, causing your dash cam to trigger frequently even with minor impacts. This can lead to unnecessary recordings and potential storage space issues.

  2. Can I adjust the impact sensitivity of my dash cam while it is recording?
    The adjustment of impact sensitivity usually requires accessing the dash cam’s settings. It is recommended to make changes when the device is not actively recording to avoid any disruptions in the recording process.

  3. Are there dash cam models that offer customizable impact sensitivity settings?
    Yes, some dash cam models provide the option to customize the impact sensitivity to suit your preferences. These models typically offer a range of sensitivity settings, allowing you to find the perfect balance for your needs.

  4. How does impact sensitivity differ from motion detection?
    While motion detection focuses on detecting movement within the camera’s field of view, impact sensitivity specifically targets impacts or collisions. Impact sensitivity ensures that incidents involving your vehicle are captured, even if they do not involve visible movement.

  5. Can high impact sensitivity drain my dash cam’s battery faster?
    Having high impact sensitivity might slightly increase power consumption as the camera is constantly monitoring for impacts. However, modern dash cams are designed to optimize power usage, and the impact on battery life should be minimal.